kitty/docs/text-sizing-protocol.rst

The text sizing protocol
==============================================

Classically, because the terminal is a grid of equally sized characters, only
a single text size was supported in terminals, with one minor exception, some
characters were allowed to be rendered in two cells, to accommodate East Asian
square aspect ratio characters and Emoji. Here, by single text size we mean the
font size of all text on the screen is the same.

This protocol allows text to be displayed in the terminal in different sizes
both larger and smaller than the base text. It also solves the long standing
problem of robustly determining the width (in cells) a character should have.
Applications can interleave text of different sizes on the screen allowing for
typographic niceties like headlines, superscripts, etc.

Note that this protocol is fully backwards compatible, terminals that implement
it will continue to work just the same with applications that do not use it.
Because of this, it is not fully flexible in the font sizes it allows, as it
still has to work with the character cell grid based fundamental nature of the
terminal.

Quickstart
--------------

Using this protocol to display different sized text is very simple, let's
illustrate with a few examples to give us a flavor:

.. code-block:: sh

   printf "\e]_text_size_code;s=2;Double sized text\a\n\n"
   printf "\e]_text_size_code;s=3;Triple sized text\a\n\n\n"
   printf "\e]_text_size_code;n=1:d=2;Half sized text\a\n"

Note that the last example, of half sized text, has half height characters, but
they still each take one cell, this can be fixed with a little more work:

.. code-block:: sh

   printf "\e]_text_size_code;n=1:d=2:w=1;Ha\a\e]66;n=1:d=2:w=1;lf\a\n"

The ``w=1`` mechanism allows the program to tell the terminal what width the text
should take. This not only fixes using smaller text but also solves the long
standing terminal ecosystem bugs caused by the client program not knowing how
many cells the terminal will render some text in.


The escape code
-----------------

There is a single escape code used by this protocol. It is sent by client
programs to the terminal emulator to tell it to render the specified text
at the specified size. It is an ``OSC`` code of the form::

    <OSC> _text_size_code ; metadata ; text <terminator>

Here, ``OSC`` is the bytes ``ESC ] (0x1b 0x5b)``. The ``metadata`` is a colon
separated list of ``key=value`` pairs. The final part of the escape code is the
text which is simply plain text encoded as :ref:`safe_utf8`. Spaces in this
definition are for clarity only and should be ignored. The ``terminator`` is
either the byte ``BEL (0x7)`` or the bytes ``ESC ST (0x1b 0x5c)``.

There are only a handful of metadata keys, defined in the table below:


.. csv-table:: The text sizing metadata keys
   :header: "Key", "Value", "Default", "Description"

    "s", "Integer from 1 to 7",  "1", "The overall scale, the text will be rendered in a block of ``s * w`` by ``s`` cells"

    "w", "Integer from 0 to 7",  "0", "The width, in cells, in which the text should be rendered. When zero, the terminal should calculate the width as it would for normal text, splitting it up into scaled cells."

    "n", "Integer from 0 to 15", "0", "The numerator for the fractional scale."

    "d", "Integer from 0 to 15", "0", "The denominator for the fractional scale. Must be ``> n`` when non-zero."

    "v", "Integer from 0 to 2",  "0", "The vertical alignment to use for fractionally scaled text. ``0`` - top, ``1`` - bottom, ``2`` - centered"


How it works
------------------

This protocol works by allowing the client program to tell the terminal to
render text in multiple cells. The terminal can then adjust the actual font
size used to render the specified text as appropriate for the specified space.

The space to render is controlled by four metadata keys, ``s (scale)``, ``w (width)``, ``n (numerator)``
and ``d (denominator)``. The most important are the ``s`` and ``w`` keys. The text
will be rendered in a block of ``s * w`` by ``s`` cells. A special case is ``w=0``
(the default), which means the terminal splits up the text into cells as it
would normally without this protocol, but now each cell is an ``s by s`` block of
cells instead. So, for example, if the text is ``abc`` and ``s=2`` the terminal would normally
split it into three cells::

    │a│b│c│

But, because ``s=2`` it instead gets split as::

    │a░│b░│c░│
    │░░│░░│░░│

The terminal multiplies the font size by ``s`` when rendering these
characters and thus ends up rendering text at twice the base size.

When ``w`` is a non-zero value, it specifies the width in scaled cells of the
following text. Note that **all** the text in that escape code must be rendered
in ``s * w`` cells. If it does not fit, the terminal is free to do whatever it
feels is best, including truncating the text or downsizing the font size when
rendering it. It is up to client applications to use the ``w`` key wisely and not
try to render too much text in too few cells. When sending a string of text
with non zero ``w`` to the terminal emulator, the way to do it is to split up the
text into chunks that fit in ``w`` cells and send one escape code per chunk. So
for the string: ``cool-🐈`` the actual escape codes would be (ignoring the header
and trailers)::

   w=1;c w=1;o w=1;o w=1;l w=1;- w=2:🐈

Note, in particular, how the last character, the cat emoji, ``🐈`` has ``w=2``.
In practice client applications can assume that terminal emulators get the
width of all ASCII characters correct and use the ``w=0`` form for efficient
transmission, so that the above becomes::

   cool- w=2:🐈

The use of non-zero ``w`` should mainly be restricted to non-ASCII characters and
when using fractional scaling, as described below.

Fractional scaling
^^^^^^^^^^^^^^^^^^^^^^^

Using the main scale parameter (``s``) gives us only 7 font sizes. Fortunately,
this protocol allows specifying fractional scaling, fractional scaling is
applied on top of the main scale specified by ``s``. It allows niceties like:

* Normal sized text but with half a line of blank space above and half a line below (``s=2:n=1:d=2:v=2``)
* Superscripts (``n=1:d=2``)
* Subscripts (``n=1:d=2:v=1``)
* ...

The fraction is specified using an integer numerator and denominator (``n`` and
``d``). In addition, by using the ``v`` key one can vertically align the
fractionally scaled text at top, bottom or middle.

When using fractional scaling one often wants to fit more than a single
character per cell. To accommodate that, there is the ``w`` key. This specifies
the number of cells in which to render the text. For example, for a superscript
one would typically split the string into pairs of characters and use the
following for each pair::

    OSC _text_size_code ; n=1:d=2:w=1 ; ab <terminator>
    ... repeat for each pair of characters


Finally fixing the character width issue for the terminal ecosystem
---------------------------------------------------------------------

Terminals create user interfaces using text displayed in a cell grid. For
terminal software that creates sophisticated user interfaces it is particularly
important that the client program running in the terminal and the terminal
itself agree on how many cells a particular string should be rendered in. If
the two disagree, then the entire user interface can be broken, leading to
catastrophic failures.

Fundamentally, this is a co-ordination problem. Both the client program and the
terminal have to somehow share the same database of character properties and
the same algorithm for computing string lengths in cells based on that shared
database. Sadly, there is no such shared database in reality. The closest we
have is the Unicode standard. Unfortunately, the Unicode standard has a new
version almost every year and actually changes the width assigned to some
characters in different versions. Furthermore, to actually get the "correct"
width for a string using that standard one has to do grapheme segmentation,
which is an `extremely complex algorithm
<https://www.unicode.org/reports/tr29/#Grapheme_Cluster_Boundaries>`__.
Expecting all terminals and all terminal programs to have both up-to-date
character databases and a bug free implementation of this algorithm is not
realistic.

So instead, this protocol solves this issue robustly by removing the
co-ordination problem and putting only one actor in charge of determining
string width. The client becomes responsible for doing whatever level of
grapheme segmentation it is comfortable with using whatever Unicode database is
at its disposal and then it can transmit the segmented string to the terminal
with the appropriate ``w`` values so that the terminal renders the text in the
exact number of cells the client expects.


Detecting if the terminal supports this protocol
-----------------------------------------------------

To detect support for this protocol use the `CPR (Cursor Position Report)
<https://vt100.net/docs/vt510-rm/CPR.html>`__ escape code. Send a ``CPR``
followed by ``\e]_text_size_code;w=2;a\a`` which will draw an ``a`` character in
two cells, followed by another ``CPR``. Then wait for the two responses from the
terminal to the two CPR queries. If the cursor position in the two responses is
the same, the terminal does not support this protocol, if the second response
has a different cursor position then it is supported.


Interaction with other terminal controls
--------------------------------------------------